Is your Windows 10 PC stuck at Getting Windows ready, don’t turn off your computer? That’s a common error experienced by users when trying to start their PC, shut it down, or even restart. While you can wait longer and see if the screen moves on since the process usually takes longer, as Microsoft tech support advised, it may not always work. However, there’s nothing to panic about, as we are here with a couple of workarounds for you.
Let’s see how to fix Windows 10 PC stuck at getting windows ready, don’t turn off your computer.
Getting Windows Ready Don’t Turn off Your Computer Fix By Power Resetting Your PC
Doing a power reset can clear all the information stored in the system memory without causing any damage to the data, thus helping you move from the getting ready screen.
Fix Getting Windows Ready Don’t Turn off Your Computer Windows 10 Stuck Error in: 19 minutes
Shut down first
Shut down your system despite the getting ready message on the screen.
Detach external devices
Detach any external devices like a USB, external hard drive, smartphone, headphone, etc., from your PC.
Long press power button
Now, long press the power button of your PC for a max of 30 seconds. It will help drain any remaining power in your computer and then completely shut it down.
Remove power cable
Remove the power cable from your PC and remove the battery if it's a laptop.
Wait for around 30 seconds.
Wait for around 30 seconds, re-insert the battery, and attach the power cable back to your PC.
Switch on now
Now, switch on your computer, and you should not see the getting ready screen again.
However, if this does not help you, you may try deleting the problematic files as explained below.
Choose Your Best Computer Today:
You may also like to read:
- 15 Amazing Computer Tricks and Tips Everyone Should Know
- How to Overcome Wireless Car Charger Problem
- Best Fake Email Address Generators – Get Free Temporarily Email
- Best Free YouTube to MP3 Converters Software
- 5 Reasons – Why Tablets are Better than Smartphones
Deleting Problematic Files
Step 1: Restart your PC and immediately press the F8 key. Keep pressing the F8 key till you reach the Windows Advanced Boot Options screen.
From the options, select Troubleshoot.
Step 2: In the next screen, select Advanced Options and then choose Command Prompt.
Step 3: Copy the below command and paste it into the command line. Then hit Enter:
C: cd Windows\System32\LogFiles\Srt. SrtTrail.txt
Step 4: If it generates a command like “Boot critical file c:\windows\system32\drivers\vsock.sys is corrupt” then go to the file location (as specified in the command) using the Command Prompt and press Enter:
Step 5: Now, type Del in the command line and hit Enter.
It will delete the problematic file from the location.
Run System File Checker
If Windows is taking too long to get Windows 8/10 ready or the above methods fail to troubleshoot stuck at Getting Windows ready, you can try the System File Checker tool. Sometimes Window needs to get ready for an update at every reboot caused by the corrupted files on your computer.
Here is how to fix damaged system files:
Insert the installation disc or USB drive into your PC and boot it from this drive. Go to Repair your computer, enter the Choose an option screen and choose Troubleshoot.
Click Command Prompt on the Advanced options page.
After the cmd window is open, type the command: sfc /scannow and press Enter on the keyboard.
Wait patiently until the verification process is 100% completed. Then reboot the computer to see whether getting Windows ready Windows 10 loop still exists.
Uninstall Recently Installed Windows Updates
If startup repair failed to fix these startup problems, And again windows Stuck Getting windows ready screen that causes we need to boot into safe mode and uninstall the recently installed updates. Again access advanced options, click on startup setting -> Click on Restart -> Then press F4 To access safe mode and F5 To access safe mode with networking as shown below.
After booting into Windows 10 safe mode, open Control Panel and then go to Programs and select Programs and features options; from the left pane of the Programs and Features window, click on the View installed update option. Now, you will see the list of all the Installed updates. Select the recently installed updates leading to Windows 10 getting windows ready stuck issue and Uninstall them.
After uninstalling the updates causing the problem, get out of Safe Mode and restart your Windows 10 PC into normal mode. Now, you shouldn’t face any Windows 10 update issues like Getting Windows ready Don’t turn off your computer screen stuck after the update.
Reset Windows Update Components
Then what if startup repair and uninstall recently installed updates failed to fix the problem, Windows 10 stuck Getting Windows ready Don’t turn off your computer? You can try Resetting the windows update components, which may help fix almost all windows update-related problems.
Again, open windows services and check windows update service, BITS, and sysmain service are not running on safe mode. If it's running, right-click on it and select stop. Now open C:\windows here, look for the folder named SoftwareDistribution, Right-click on it, and rename it as SoftwareDistribution.bak.
Note: SoftwareDistribution is the folder where windows download and store updated files. If any files get corrupted on this folder or windows installed buggy updates, this will cause windows stuck getting ready.Getting Windows Ready Don’t Turn off Your Computer Windows 10 Stuck Error
Renaming the folder as SoftwareDistribution.bak, Windows automatically creates a new SoftwareDistribution folder, downloads, stores new bug-free update files, and fix most windows update installation-related problems.
Now restart windows and check on the following start windows usually start without any stuck installing updates.
Uninstall Recently Installed Software
If your Windows update process went smoothly before installing any software on your computer, then we may have found the culprit. If the respective software solutions are not fully compatible with the latest Windows 10 OS version, you may encounter update errors.
So, before downloading any software on your PC, make sure it’s fully compatible with your OS.
In this case, use the power button to turn off your computer, power it back on, and uninstall any recently installed apps and programs. Then restart your machine and check for updates again.
More interesting articles for you:
- Download Music From TikTok Video on Computer, Android, and iPhone
- Ways to Earn Money Online Without Investment
- 9 Best Live Net TV App Alternatives
- Best Free Fastest Web Browsers for PC
- Best Social Media Security Apps to Protection from Hackers
Perform a System Restore
If the above methods still cannot fix Windows 10 getting windows ready, don't turn off your computer stuck issue; you can go for a system restore. As windows are stuck on getting the ready screen and preventing access to a standard desktop that causes again, you need to access the advanced option to restore the system.
Note: Remember that restoring won’t affect your personal files, but it will remove apps, drivers, and updates installed after the restore point was made.Getting Windows Ready Don’t Turn off Your Computer Windows 10 Stuck Error
First, access advanced options and click on system restore. Select any recent System Restore Point you have created and follow on-screen instructions to complete the system restoration process.
Performing the above solutions mostly, almost 99% fix “Getting Windows ready, Don’t turn off your computer,” but unfortunately, if you still have the problem, Reinstall Windows 10 is the last and final option to get back your system working correctly.
Uninstall Recently Installed Software
If the software solutions aren’t compatible with the latest Windows 10 OS version, you can get update issues.
So, before installing any program on your PC, be sure it’s compatible with your operating system.
- In this scenario, switch off your computer, turn it back on.
- Delete any recently installed apps and programs using the power button. After that, reboot your computer and check for updates once more.
We hope that this information will assist you in upgrading to the most recent Windows edition. It is also unblocking the computer stuck on the Windows installation process.
FAQ About Getting Windows Ready Don’t Turn off Your Computer
Why does getting windows ready take so long?
When prompted with the message Getting Windows ready, don’t turn off your computer. Your system may be processing some tasks in the background, such as downloading and installing files, starting a Windows 10 update process, modifying settings of the applications and modules, etc. The system may take some time to complete these tasks depending on the number of programs installed on your PC.
How long should I wait to get Windows Ready?
According to Microsoft itself, some users need to wait longer than others until the getting Windows ready screen completes. It would be best to wait more than 2-3 hours before canceling.
What do I do if my Windows 10 update is stuck?
If you want to fix when a Windows 10 update is stuck, here's what you'll need to do:
1. Give It Time (Then Force A Restart)
2. Run Windows Update Troubleshooter.
3. Delete Temporary Windows Update Files.
4. Manually Update Your PC From Microsoft Update Catalog.
5. Revert Your Windows Installation Using System Restore.
Final Words – Getting Windows Ready Don’t Turn off Your Computer Windows 10
These steps should help you get rid of the getting-ready screen, but if the problem persists, the only option left is to perform a system restore. It will revert your Windows 10 PC to a previous working state.
Did these solutions help fix “Getting Windows ready, Don’t turn off your computer”? Let us know which option worked for you? If you face any difficulty applying these solutions, please discuss them in the comments below.